1958 Ariel Square Four
This 1958 Square Four is pristine, inside and out, and looks as if it could have come off the Ariel production line this month.
The chassis underwent a detailed cosmetic restoration by a well recognized Ariel specialist, including beautifully-done, frame, paint
& chrome work, with all fasteners either chrome or zinc plated, wheels with new tires fitted.
The engine had not been run for many years, so it was totally disassembled; refurbishing, replacing or repairing as needed, with some modern updates:
12v negative earth replaces the 6v positive earth system. The entire wiring harness was replaced, a visually period-correct high-output alternator unit (300 Watts) from ironhorsespares.uk replaced the non-functioning dynamo. Electronic ignition is fitted in the original distributor and the solid state voltage regulator/rectifier is installed in the original voltage regulator housing. The bike starts easily with the first or second kick, idles well and runs smoothly through the four-speed gearbox.
OTHER TECHNICAL DETAILS:
Thorough cleaning of both crankshaft oil ways removing all tracers of dried oil and debris – a critical and often overlooked issue • Journals within spec, big end bearings replaced • Drive-side main bearings replaced • Timing-side plain bearings “Babbited”
& line bored for maximum precision ensuring long & reliable service • Cylinder bores honed, new piston rings fitted • A broken rocker arm
& two suspect pushrods replaced • Following professional assessment of the cylinder head, valve seats reground using original guides
& valves • Primary drive parts renewed and new clutch installed • Original oil pump replaced with high output Morgo unit for high-zinc 20-50 weight oil • S.U. carburetor cleaned and re-jetted.
Asking price is $25,000.
Omaha, NE
E-mail:
(402) 850-7630. This is a mobile phone
