345-01
Plug wire kit, universal, black, copper, 7mm

36" of black silicone 7mm copper core wire made in USA with a black rubber plug cap fitted on each end plus two straight and two right angle coil boots and terminals, supplied loose in bag. Cut the wire to length as needed and attach appropriate coil ends. One kit needed for pre-oil-in-frame Triumph, BSA and Norton twins; two for oil-in-frame Triumph and BSA twins; three for triples. Ideal for custom and performance applications!

(Not for use with Boyer Micro-Digital Ignition!)

345-1140
Plug wire set, black, long type, for oilframe twins, Champion resistor

22" black resistor wire, fitted with soft black Champion logo plug caps and right angle coil boots to suit under seat coils on oil-in-frame Triumph and BSA twins as well as some other applications. Supplied in pairs. Excellent for restorations!

345-1202
Plug wire set, black, short type, for twins, Champion resistor

7" of black resistor wire; made up to suit 71on Commandos and pre-oil-in-frame Triumph unit twins with coils under tank; may suit other applications. Fitted with soft Champion logo plug caps; angled coil boots. Supplied in pairs. Ideal for restorations!

345-1396
Plug wire set T160, black

24" black resistor wires, made up for T160 Triumph Triple, fitted with soft black plug caps and right angle coil boots. Supplied as set of three.

345-03
Plug wire & cap, black, resistor, 24", 7mm

Same applications as 345-1140, but made of 24" of black US made 7mm resistor wire with black rubber plug caps. Sold "each." Best value! (High quality at very low price.)

345-03/A
Plug wire & cap, copper, 24", 7mm

Same applications as 345-1140, but with black silicone 7mm copper core wire made in USA. Sold "each".

(Not for use with Boyer Micro-Digital

345-04
Plug wire & cap, black, resistor, 10", 7mm

Same applications as 345-1202 but made of 10" of black US made 7mm resistor wire fitted with black, soft rubber plug caps and straight coil boots. Sold "each". best value! 
(High quality at very low price.)

345-04/A
Plug wire & cap, copper, 10", 7mm

Same applications as 345-1202 but made of 10" of black silicone US made 7mm copper core wire fitted with black, soft rubber plug caps and straight coil boots. (Not for use with Boyer Micro-Digital Ignition!)

(Note: Resistor plug wires must be used with Boyer Micro-Digital Ignition Kits.)

New 345-06 
36" of red US made 8mm resistor wire with a black rubber plug cap fitted on each end plus two straight and two right angle coil boots and terminals, supplied loose in bag. Cut the wire to length as needed and attach appropriate coil ends. One kit needed for pre-oil-in-frame Triumph, BSA and Norton twins; two for oil-in-frame Triumph and BSA twins; three for triples. Ideal for custom and performance applications! Fattest plug wires we sell!

(Note: Resistor plug wires must be used with Boyer Micro-Digital Ignition Kits.)